Suitable for all refrigerantsVoltage: 12V DCOperating current: 130mA (±20mA)Working temperature: -10°C/+50°CMax. relay current capacity: 10A/120VAC, 10A/24VDCOrigin: Greece

The basis of heated electrolyte sensor technology sets new standards in the area of leak detection. The sensor has a higher than average life cycle of approximately 10 years, which is a large advantage over conventional leak detectors. With the large LCD display, one is always informed about the ongoing activities. Through the adjustment of the 3 sensitivity levels, it is easy to localize large leakages. In addition, the inspection light is ideal for having a good overview, even in the dark. The REF-LOCATOR is delivered in a practical, rugged case. Click inside for more..

PS-i Ultrasonic Leak Detector The PS-i is capable of finding pressure and vacuum leaks in HVAC and compressed air systems, without being affected by wind or leaked refrigerants in confined spaces.
The PS-i can test a TXV (Thermal Expansion Valve) in few minutes instead of hours

Ultrasonic Sound Generator artificially pressurizes rooms, cabins, and enclosures.It works in conjunction with any detector.Burst Mode helps break resonances, as it acts like a sound hammer.

- Extremely compact design concept similar to a cell phone-Ergonomical design focused on performance and simplicity of operation-Microprocessor controlled unit and state of the art microelectronics-Detects all halogenated refrigerants- Certified to SAE J1627 standard, Certified according to EN14624- Two sensitivity levels using a double-click computermouse action- Sensitivity: less than 3gR/year (0,1 oz/year)

- Extremely compact design concept similar to a cell phone-Ergonomical design focused on performance and simplicity of operation-Microprocessor controlled unit and state of the art microelectronics-Detects Ammonia, Isobutane- Certified to SAE J1627 standard, Certified according to EN14624- Two sensitivity levels using a double-click computermouse action- Sensitivity: less than 3gR/year (0,1 oz/year)

The only leak detector with fully automatic sensitivity selection and control!!Dynamic signal analysis and automatic sensitivity control, enables the Leak-Seeker® II to make quick work of any leak regardless of its size or the refrigerant type…without operator interventionSensitivity to 35 parts per million (less than .01 oz per year)Superior sensitivity to R410A and new HFO refrigerantsMeets or exceeds all US and International standards2 year warranty

Fully automatic electronic refrigerant leak detector for all HFC, HCFC, CFC, SF6 gasses & blends.>Exclusive POWERSHIFT software automatically monitors, controls & adjusts all critical instrument settings to ensure maximum leak search results under any job environment.>Two separate visual LED displays enables user to pinpoint the exact location of leak source & the approximate size of that leak. > More.....

Fully automatic electronic refrigerant leak detector for all HFC, HCFC, CFC, SF6 gasses & blends.>Exclusive POWERSHIFT software automatically monitors, controls & adjusts all critical instrument settings to ensure maximum leak search results under any job environment.>Utilizes revolutionary infrared absorption sensor for consistent responsesProvides .6gr/year sensitivity to all refrigerants, including R-12 and R-134a On-board diagnostics indicate charging status, low battery and sensor failureIs not affected by smoke, humidity, etc.

Detect once power on, no need manual-adjustment.Enter into the best state of detecting automatically while adjusting the sensitivityTricolor battery voltage indication.Equipped with quality sensor, high sensitivity, 6gr/yrInner precise IC with ultra-low consume circuit design, more stable, longer battery time. More..

Detect once power on, no need manual-adjustment.Enter into the best state of detecting automatically while adjusting the sensitivityTricolor battery voltage indication.Equipped with quality sensor, high sensitivity, 6gr/yrInner precise IC with ultra-low consume circuit design, more stable, longer battery time. More..

Detect once power on, no need manual-adjustment.Enter into the best state of detecting automatically while adjusting the sensitivityTricolor battery voltage indication.Equipped with quality sensor, high sensitivity, 6gr/yrInner precise IC with ultra-low consume circuit design, more stable, longer battery time.

Wall leak detector with alarmOperating temperature: -22°C/+52°C Power, Voltage: 230V/50Hz , 9V/0,3A Certificates: CE Made in Greece

Leak Detector 220V UV-13 SET Cordless

KIT complete in a sturdy plastic caseUV-12 lets you find leaks where electronic leak detectors could be compromised such as, intermittent leaks, multiple leaks and extremely small leaks.This Universal UV Leak Detection kit can be used in the automotive field as well on refrigeration and air conditioning systems as well on refrigeration and air conditioning systems.

Complete professional grade kit Powerful true UVLED lamp technology Quick & easy Squeeze Gun TMinjection system Uses mess-free Moonshine TMdye cartridgeUV55 Includes: UVPRO LED flashlight, squeeze gun injector w/ hose, (1) UV dye cartridge, R-134a 90° low coupler, enhancing safety glasses, UVS2 dye cartridge and carrying case

Special for small surface detection.Provided with 3 Χ ΑΑΑΑ alkaline batteriesSize: 12.9cm x 1.33cmNet Weight: 17g/pcMaterial: aluminizePrinting on penlight : silk screen printing or engravedPacking: individually packed in PP bag

The Trace-Finder can be added to all refrigerants and refrigeration systems. Trace will make the refrigerant intense red and therefore leaks become immediately visible. The application does not affect the system in any way

Contains 237ml.4pcs per box.

Contains 375 gr. Completely safe, can be used even with oxygen.

Technological gas leak and escape detector.Especially designed to check the airtightness of systems using any type of gas. Any leaks are detected by the formation of bubbles or foam.Supplied in a 12-piece display unit.For your safety on the job.